|
|
A high quality audio-amp in a 5-pin TO220 package that does not require insulating washers between the metal tab and heatsink in single rail supply applications. The amp will operate with single or split supplies. The distortion up to 12W with 4 is less than 0· 2% typically (less than 0· 5% up to 14W) and up to 8W with 8 is less than 0· 1% (less than 0· 5% up to 9W). The circuits shown for the 2006 are suitable for use with this IC, but the supply voltage should be increased to +14V and -14V (or 28V for the single supply circuit). In addition the bridge amplifier will deliver 24W with 8 (or with 2006 and power supplies of +12V and -12V it will deliver 20W with 8). |
| R2: |
Min Res 680 |
(M680R) |
| R4,5: |
Min Res 1 |
(M1R) |
| R8: |
Min Res 680 |
(M680R) |
| C1: |
Axial 1╡F 100V |
(FB12N) |
| C2: |
Axial 22╡F 35V |
(FB30H) |
| C3: |
Polyester 0· 22╡F |
(BX78K) |
| C4: |
Polyester 0· 1╡F |
(BX76H) |
| C5: |
Polyester 0· 22╡F |
(BX78K) |
| C6: |
Polyester 0· 1╡F |
(BX76H) |
| C7: |
Axial 22╡F 35V |
(FB30H) |
|
